Knife Holder Cn - Leica CM1860 Instructions For Use Manual

7. Daily Use of the Instrument

7.3.3 Knife holder CN

2
23
44
Inserting the base
1. To insert the blade/knife holder base (1), move
1
3
2. To clamp the blade/knife holder base, turn the
Fig. 40
Inserting knife holder CN
3. Push the upper part of the knife holder (3) onto
3
1
Fig. 41
the lever (2) to the back. Slide the base onto
the T-piece (3) of the baseplate.
When inserting the blade/knife holder
base, you have to overcome the resis-
tance of a spring (located in the foot
of the knife holder) by applying a little
pressure towards the left.
lever (2) to the front.
the base (1). Clamp the knife holder into place
using an Allen key (No. 4) on the left side (23).
Clearance angle settings of 4° - 6° (knife
holder CN and blade holder CE-TC) are
well suited for most applications.
Instructions for Use V 1.6 RevI – 10/2016