Assembling the anti-roll guide system/replacing the anti-roll plate
6
10
9
7.3.2 Blade holder CE-TC
Leica CM1860/CM1860 UV – Cryostat
8
Fig. 38
Fig. 39
7.
1. Insert the glass into the interchangeable frame
and tighten it evenly using the knurled screws (7).
2. Insert the shaft (8) of the metal frame for ex-
changeable glass inserts from above into the
bore of the swinging arm (6) in such a way that
the pin rests in the notch.
3. Push the white plastic plate (9) from below
7
onto the shaft (8).
4. Screw the knurled nut (10) from below onto
the shaft (8).
All 4 lengths of the anti-roll guide glass
can be used.
The blade holder CE-TC is designed only for dis-
posable carbide metal blades (tungsten carbide
- TC65).
The handling of this holder is identical to that of
the blade holder CE.
Daily Use of the Instrument
43