Introduction; Associated Documents; The Id50/ Id60 Series Panel - Notifier ID50 SERIES Operating Manual

ID50 Series Panel - Operating Manual
1

Introduction

This manual contains operating instructions for the ID50
and ID60 Series Fire Detection Panels. Differences
between the ID50 and ID60 panels are given in
Appendix 3.
Users of this manual are assumed to be working with a
panel that has already been installed and configured
appropriately for the area under its supervision.

1.1 Associated Documents

This manual does not describe the installation or
configuration procedures of the panel. For information
on these topics, refer to the ID50 Series
Panel - Installation,
Configuration Manual (Ref. 997-263-000-X).

1.2 The ID50/ ID60 Series Panel

The panel, as supplied by NOTIFIER, is a 1-loop, 16-zone
Analogue Addressable Panel. The single loop has the
capacity for up to 99 analogue sensors plus up to 99
modules and, in some installations, panels may also be
connected to repeaters using the RS485 Communications
Link.
All the control and operation functions described in this
manual can be carried out using the pushbuttons on the
front of the panel.
A keyswitch is provided which, when set to the right, has
the same effect as entering an access 2 passcode. Set it
to the centre to cancel out of all menus and return to the
Status: NORMAL display. This indicates access level 2
is de-selected.
1
Commissioning and
997-264-000-8, Issue 8
January 2007