Panel Controls And Indicators; Controls - Notifier ID50 SERIES Operating Manual

ID50 Series Panel - Operating Manual
2

Panel Controls and Indicators

The panel's controls and indicators are used to operate
the overall system and display the panel status. The panel
has five function pushbuttons, twelve numeric/cursor keys
and thirty-two zonal LED indicators, two 'FIRE' indicators
and fourteen system status LED indicators.
An access level 2 keyswitch is provided to enable the
operation of panel controls and access to user menus
without entering a passcode via the numeric keypad.

2.1 Controls

The pushbuttons are listed below, together with
references to the relevant sections of the manual:
Function Pushbuttons
•
MUTE BUZZER - (Section 4.2).
•
EXTEND DELAY - (Section 4.3).
•
END DELAY/EVACUATE
•
SILENCE/RESOUND - (Section 4.5).
•
RESET - (Section 4.6).
1 Also configurable as Transmission Device (TD)
Enable/Disable.
Numeric/Cursor Keys
•
Numeric/Cursor keys - (Section 4.7).
Keyswitch
Turn the keyswitch to enable level 2 access. The
keyswitch provides an alternative to entering the level 2
access code via the numeric keys. See Section 4.1.3
and Section 4.1.4.
3
1
- (Section 4.4)
997-264-000-8, Issue 8
January 2007