Outputs - User Option - Notifier ID50 SERIES Operating Manual

2
1
2
3
4
5
5
ID50 Series Panel - Operating Manual

4.10.2 Outputs - User Option

The Outputs option allows the user to disable or enable
all sounders, the extinguishant system (if fitted), and relay
and control outputs.
To Disable/Enable these outputs, proceed as follows:
[U0 Disable/Enable]
3:Day Mode
1 Using the numeric keypad, press the '
to display the Disable/Enable Outputs menu:
[U0 Disable/Enable]
2:Transmission Device Outputs
[U0 Disable/Enable]
4:Fault Relays
2 Press the appropriate numbered button on the
numeric keypad to display one of the following:
a. Press the '
sounders.
Disable ALL Sounder Outputs
Press to confirm
b. Press the '
transmission device outputs.
Disable ALL Transmission Device Outputs
Press to confirm
c. Press the '
Extinguishant System outputs.
Disable ALL Extinguishant System Outputs
Press to confirm
d. Press the '
relay outputs.
Disable ALL Fault Relay Outputs
Press to confirm
e. Press the '
(relays and control) outputs.
Disable ALL Relay and CTL Outputs
Press to confirm
3 Press the '
operation. The LCD automatically returns to the
Disable/Enable menu.
When outputs are disabled, the general DISABLEMENT
LED and, if applicable, the FIRE CONTROL O/P: FAULT/
DISABLED, FIRE OUTPUT: FAULT/DISABLED and/or
SOUNDERS: FAULT/DISABLED LEDs illuminate. If the
Extinguishant System is disabled, only the
DISABLEMENT LED will illuminate.
31
1:Zone 2:Outputs
4:Delays
2
1:Sounders
:More
3:Ext. Systems
5:Others
' button to disable/enable all
1
<:Cancel
' button to disable/enable all
2
<:Cancel
' button to disable/enable all
2
<:Cancel
' button to disable/enable all Fault
3
<:Cancel
' button to disable/enable 'other'
5
<:Cancel
' button to confirm the selected
5
997-264-000-8, Issue 8
January 2007
' pushbutton
:More