Notifier ID50 SERIES Operating Manual page 33

1 5
1 5
2
[Enable]
8
Press to confirm
[Disable] Zone 0 1 - Disable S01 ?
Press to confirm
[Disable]
Press to confirm
2
ID50 Series Panel - Operating Manual
3 The LCD then displays the current state of the zone
5
Note: Press the '
[Disable/Enable] Zone 0 1
1:Full Zone
4 To disable:
a. A Full Zone - Press the '
[Disable/Enable] Zone 0 1
Press
[Disable/Enable] Zone 0 1
1:Full Zone
[Disable/Enable] Zone 0 1
Press
[Disable/Enable] Zone 0 1
1:Full Zone
b. A Partial Zone - Press the '
[Disable/Enable] Zone 0 1
1:Full Zone
5 To select individual devices use the '
Zone 0 1 - Enable S02 ?
<:Cancel
Zone 0 1 - Disable M99 ?
29
(Fully enabled, Fully disabled or Part disabled) and
prompts for selection of Full Zone or Devices in zone:
/ ' buttons to step to the previous/
2 8
next zone and confirm using the '
2:Device in Zone
keypad to select the Full Zone option, and the '
button to confirm.
to Confirm
2:Device in Zone
The DISABLEMENT and relevant ZONE FAULT/
DISABLE/TEST LEDs illuminate, indicating that the
selected zone(s) are now disabled. The LCD returns
to the Disable/Enable menu.
To enable a Full Zone:
to Confirm
2:Device in Zone
The DISABLEMENT and relevant ZONE FAULT/
DISABLE/TEST LEDs extinguish.
keypad to select the Device in Zone option:
2:Device in Zone
to display the required device(s). Confirm selection of
each by pressing the '
5
<:Cancel
<:Cancel
' button.
5
(Fully enabled)
: More
' button on the numeric
1
5
Disable fully ?
<:Cancel
Fully disabled
: More
Enable fully ?
<:Cancel
Fully enabled
: More
' button on the numeric
2
Part disabled
: More
/ ' buttons
2 8
' button.
5
997-264-000-8, Issue 8
January 2007
'