Indicators - Notifier ID50 SERIES Operating Manual

997-264-000-8, Issue 8
January 2007
ID50 Series Panel - Operating Manual

2.2 Indicators

The panel status indicators comprise three groups:
a. Zone Status LED indicators.
b. Panel/System LED indicators.
c. Visible/Audible indicators.
Zone Status LED Indicators
•
ZONE FIRE - these LEDs indicate affected zone(s).
•
ZONE FAULT/DISABLE/TEST - these LEDs indicate
affected zone(s).
Panel/System LED Indicators
•
FIRE - these LEDs indicate a fire condition.
•
Other System Status LEDs:
FAULT
DISABLEMENT
TEST
DELAY ACTIVE
FIRE OUTPUT ACTIVE indicates fire outputs have
PRE-ALARM
POWER
SYSTEM FAULT
EARTH FAULT
PLANT ALARM
FIRE CONTROL O/P: FAULT/DISABLED
FIRE OUTPUT: FAULT/DISABLED
SOUNDER: FAULT/DISABLED
POWER SUPPLY FAULT
1 This LED is also configurable as SOUNDERS SILENCED.
2
This LED can be configured as: FAULT O/P: FAULT/
DISABLED.
Visible/Audible Indicators
•
Liquid Crystal Display (LCD) - (Section 4.1.1).
•
Internal Buzzer - (Section 4.1.2).
4
indicates a fault has been
detected by the panel.
indicates the presence of a
m a n u a l l y - c o n f i g u r e d
disablement.
indicates a test is in progress.
indicates delays are active.
been operated.
1
indicates a
condition exists.
indicates status of power
supply.
indicates the CPU has reset
or a system fault has occurred.
indicates an earth fault has
occurred.
2
indicates a fault or warning
from a plant-monitoring device.
indicates a fire control output
fault or disablement.
indicates a fire output fault or
disablement
indicates a sounder circuit
fault or disablement
indicates an unsatisfactory
power supply to the panel.
pre-alarm