Devices - User Option - Notifier ID50 SERIES Operating Manual

ID50 Series Panel - Operating Manual
2
Device Device
Address Type
[U0 Sensor 02 - OPT]
PW1:286 2:283
2
[U0 Sensor 03 - OPT]
PW1:286
Pulse Width
Time Periods

4.12.2 Devices - User Option

The Devices User Option allows the user to observe all
loop devices in turn. To view Devices, from the View Mode
menu:
[U0 View] 1:Log 2:Devices
4:Input Events 5:Disabled
1 On the numeric keypad, press the '
the Devices display.The LCD displays the last-viewed
sensor address:
[U0 Sensor nn - AAA]
PW1:286 2:283 3:285
2 Press the ' /
2
address entries until the desired sensor is displayed.
>: Next
3:285 4:1003 5:0292 <:Exit
2:283 3:285 4:1003
3 Press the
6
information.
[U0 Sensor nn - OPT]
-〉 〉 〉 〉 〉 050% -〉 〉 〉 〉 〉 050%
Level 050%
Note: Three percentage values are displayed [this is the
device's alarm level status, e.g. 100% (default) is
equivalent to alarm]. The value on the left is the
current alarm status level. The other percentage
values are historical; the previous two alarm status
percentages are displayed, the one on the left being
the more recent.
4 Press the ' ' button to return to the View Mode
4
menu.
TM
AWACS Devices (ID60 only)
The ID60 panel allows the configuration of all sensor
types, except HEAT sensors, to use the AWACS
sensing algorithm. For these devices an additional screen
is available which displays the current percentage values
for alarm and pre-alarm.
[U0 Sensor nn - AVS]
AWACS - Alarm: 000%,
39
3:Faults
: More
' button to select
2
>: Next : More
4:1003 5:0292 <:Exit
' buttons to scroll through device
8
8
: More
>: Next : More
5:0292 <:Exit
' button to view additional device
>: Next : More
>: Next : More
Prealarm: 000%
997-264-000-8, Issue 8
January 2007
TM multi-