4. Using the Recovery Console
Upgrading the System Using an Image File from the Local Disk
To upgrade the system using an image file from the local disk, you must first upload the upgrade
Admin UI Firmware
image using the
Console and perform the upgrade.
For more information about how to use the
To upgrade the system using an image file from the local disk:
1.
Enter 1 to select the Upgrade System option.
2.
Press the Enter key on your keyboard to select OK.
System Upgrade
The
3.
Select the Local Load Software from the Local Disk option.
4.
Press the Enter key on your keyboard to select OK.
File Selection
The
5.
Select the file you want to use to upgrade the system and select OK.
tab. You can then reboot the server to access the Recovery
Admin UI Firmware
window displays.
window displays with a list of available image files.
tab, see
63
Updating the
Firmware.