Configuring The Content Capturer - Vidyo vidyoroom Administrator's Manual

Hide thumbs Also See for vidyoroom:

Table of Contents

2. Configuring the System Using the Admin UI



Select the Off radio button to turn Anti-Flicker Mode off

10.

Select the Auto-reboot if INOGENI is not detected checkbox if you have a VidyoRoom HD-

40 Revision B system with an INOGENI device.

Configuring the Content Capturer

With VidyoPortal version 3.1 or later and either a VidyoRoom HD-230 version 3.2.2 or later, HD-100

Revision D, or HD-40 Revision B, you can use the Audio/Video Projection feature. This feature

enables you to play local audio and video content when not in a call at native resolution and frame

rate.

To configure the content capturer:

Settings

Click the

Click the blue triangle next to the words

settings if needed.

Select the content capturing device from the Devices drop-down that the VidyoRoom or

VidyoPanorama 600 will use, or select None if no content capturing device will be used.

The options available depend upon which content capturing device you selected from the

Devices drop-down. In addition, depending upon which device you select, the other fields

in the Content Capturer section may or may not display.

Select one of the Transmit Bandwidth radio buttons to set the maximum transmit

bandwidth of the device.

For the best audio/video projection experience, select 4Mb/s if available.

Select one of the Transmit Resolution radio buttons to set the transmit resolution of the

device.

tab.

Content Capturer

to view the content capturer

Table of Contents

Vidyopanorama 600