2. Configuring the System Using the Admin UI
Configuring the Account Settings
To configure the account settings:
Settings
1.
Click the
2.
Click the blue triangle next to the word
3.
Enter the VidyoPortal FQDN in the VidyoPortal field.
Note
If a secured VidyoPortal is being used and port 80 is not open, you must explicitly add
https:// to the VidyoPortal FQDN; otherwise, the VidyoRoom or VidyoPanorama 600 will be
unable to log in to the VidyoPortal.
4.
Enter your VidyoPortal user name (as created on the VidyoPortal) in the Username field.
5.
Enter your VidyoPortal password (as created on the VidyoPortal) in the Password field.
6.
Click Apply.
Configuring the Network Settings
When configuring the network settings as described in this section, you should also consider the
following:
VidyoRoom and VidyoPanorama 600 are automatically configured to respond to Wake-on-LAN
(WoL) packet requests. Review your current firewall settings and make sure they permit WoL
requests over ports 7 and 9.
tab.
Account
to view the account settings if needed.
20