Table of Contents
Advertisement
2. Configuring the System Using the Admin UI
Select the Off radio button if you do not want VidyoRoom or VidyoPanorama 600 to
automatically share when a conference starts.
For example, if you selected the Off radio button, sharing would not start automatically.
This option is not applicable for the VidyoRoom HD-40.
22.
Edit the default 4000 ms value in the VISCA Passthrough Timeout field if you want to
change the VISCA passthrough timeout value.
The four-second (4000 ms) VISCA passthrough timeout was added to prevent the
VidyoRoom from returning "buffer full" messages in response to VISCA commands.
23.
Deselect the Call In Progress Indicator checkbox if you do not want the Call In Progress
Indicator to display during active calls; otherwise leave selected.
Configuring the Language and Time Zone
To configure the language and time zone:
1.
Click the Settings tab.
2.
Click the blue triangle next to the words
and time zone settings if needed.
3.
Select the time zone from the Time Zones drop-down in which the VidyoRoom or
VidyoPanorama 600 is located.
4.
Select the language that you want to display on the VidyoRoom or VidyoPanorama 600
user interface from the Languages drop-down.
5.
Select System if you want the VidyoRoom or VidyoPanorama 600 to display in the system
language selected on the VidyoPortal.
Language and Time Zone
29
to view the language
Advertisement
Table of Contents
