Table of Contents
Advertisement
Configuring System Settings
The Settings menu enables the VidyoRoom or VidyoPanorama 600 system administrator to
configure the system and can be accessed anytime (pre-call or in-call).
To configure the system settings:
1.
Press Settings
The Settings menu displays.
2.
Select any of the following icons on the Settings menu to access the settings for that
screen:
Icon
VidyoRoom™ and VidyoPanorama™ 600 Quick User Guide
on your remote control (press twice if you are in a call).
Description
Enables you to enter values for the VidyoPortal, username, and
password.
Enables you to turn your proxy ON or OFF and specify UDP Range
values as desired.
Your VidyoRoom or VidyoPanorama 600 is set to Use DHCP by default.
This enables it to automatically obtain its IP address.
If you want to change the disabled network settings, turn DHCP OFF
and provide values for IP Address, Subnet, Gateway, and DNS.
Enables you to select a microphone, adjust the microphone level, select
from available speakers, adjust the speaker volume, turn join and exit
sounds or navigation sounds ON or OFF, and turn echo cancellation ON
or OFF.
6
Advertisement
Table of Contents
