Using The Recovery Console; Accessing The Recovery Console; Upgrading The System - Vidyo vidyoroom Administrator's Manual

4. Using the Recovery Console

This chapter describes how to use the Recovery Console. The Recovery Console enables you to:
 Upgrade the system
 Perform a factory restore
 Manage restore points
 Turn remote management on or off
 Upgrade the Recover Console software

Accessing the Recovery Console

To access the Recovery Console:
1. Connect a keyboard directly to the VidyoRoom or VidyoPanorama 600 server.
2. While the server is rebooting, press and hold the Left Shift key, and then immediately press
and hold the Right Shift key and release the Left Shift key, and then immediately press and
hold the Left Shift key and release the Right Shift key.
3. Keep repeating the previous step until the Recovery Console Main Menu appears.
Note If using VidyoRoom HD-100 Rev 4A to run VidyoRoom version 3.3.19 and later, do the
following to access the Recovery Console:
While the server is rebooting, press the Esc key on your keyboard repeatedly until the GRUB
boot menu appears. Once it appears, select the Recovery Console option using the arrow
keys on your keyboard, and then press the Enter key.

Upgrading the System

You can upgrade the system using an image file from the local disk or an image file from a USB
flash drive that you insert directly into the server.
Alternatively, you can upgrade the system using the
enables you to perform the upgrade remotely. For more information about the
tab, see Updating the Firmware.
Admin UI Firmware
62
Firmware
tab. The tab
Admin UI Firmwar
e