Calling A Legacy System; Placing A Vidyovoice (Voice-Only) Call - Vidyo VidyoRoom HD-220 User Manual

To place an IPC call with the remote control:
1. In the Contact Search field, enter user_name@portal_name, such as:
tommyc@main.vidyo.com
3. Arrow to the Join Room button and press
To place an IPC call with the VidyoRemote:
1. In the Contact Search field, enter user_name@portal_name, such as:
tommyc@main.vidyo.com
2. Click the Join Room button.

Calling a Legacy System

A legacy system is a device, such as an ordinary telephone or a conferencing system, which uses traditional
H.323 and SIP-based videoconferencing technology. A legacy system has no personal room.
The steps for calling a legacy system vary slightly depending on whether you are using the remote control or
the VidyoRemote; therefore, refer to the steps below that pertain to the device you're using.
To call a legacy system using the remote control:
1. In the Contact Search field, enter the extension number of the legacy system followed by its IP
address.
To obtain the IP address of a legacy system, contact your system administrator.
2. Arrow to the Call Direct button and press the
To call a legacy system using the VidyoRemote:
1. In the Contact Search field, enter the extension number of the legacy system followed by its IP
address.
To obtain the IP address of a legacy system, contact your system administrator.
2. Click the Call Direct button.

Placing a VidyoVoice (Voice-Only) Call

A participant without access to a VidyoPortal as either a registered user or a guest can join a conference in
your VidyoRoom from a phone. The phone number and extension for calling into your room appear in the My
Room settings page and the Home page when you select My Room.
on the remote control.
button on the remote control.
29
5. Using the Home Page