Configuring The System Using The Admin Ui; Logging Into And Out Of The Admin Ui; Logging In - Vidyo vidyoroom Administrator's Manual

2. Configuring the System Using the
Admin UI
This chapter describes how to configure the VidyoRoom or VidyoPanorama 600 using the Admin
user interface (Admin UI).
If you have a VidyoPanorama 600, check the following before you begin configuring the system:
 Ensure that you have VidyoPortal™ version 2.3.2 or later.

Change any existing user accounts configured with the "VidyoPanorama" user type on your
VidyoPortal to "VidyoRoom" user types so that they can be used with the VidyoPanorama 600.
For more information, refer to the

Logging Into and Out of the Admin UI

After you first boot up the VidyoRoom or VidyoPanorama 600, the Home screen typically appears.
If you have more than one display, you will see the IP address of the system on one of the
displays. You use this IP address to access the Admin UI. Alternatively, you can go to the Settings
screen of the On-Screen UI to obtain the IP address.
Note If you need the IP address of the system once you are already logged into the Admin UI, click
the Identify button on the Display Layout page. You can also use the CTRL + I keyboard
command to get the IP address.

Logging In

To log in to the Admin UI:
1. Enter the IP address or FQDN of the VidyoRoom or VidyoPanorama 600 in the URL bar of
your web browser:
[IP address or FQDN]
The Admin UI
VidyoConferencing Administrator Guide.
Login
page displays.
18