Table of Contents
Advertisement
2. Configuring the System Using the Admin UI
Configuring the Video Settings
To configure the video settings:
Settings
1.
Click the
2.
Click the blue triangle next to the word
3.
Select the camera that the VidyoRoom or VidyoPanorama 600 will use from the Cameras
drop-down.
4.
Select one of the Transmit Bandwidth radio buttons to set the maximum video transmit
bandwidth.
The options available depend upon the VidyoRoom model.
5.
Select one of the Transmit Resolution radio buttons to set the video transmit resolution.
The options available depend upon which Transmit Bandwidth you selected.
6.
Select one of the Transmit Framerate radio buttons to set the frames per second of the
camera.
The options available depend upon which Transmit Bandwidth you selected.
7.
Click Apply Transmit Settings.
8.
Do any of the following for Camera Control if necessary:
Click Reset Camera to reset the camera.
Click Backlight On or Backlight Off as needed to compensate for backlighting.
9.
Select one of the following Anti-Flicker Mode radio buttons:
Select the 50Hz radio button if your VidyoRoom or VidyoPanorama 600 system is
located in Europe
Select the 60Hz radio button if your system is located in North America
tab.
Video
to view the video settings if needed.
24
Advertisement
Table of Contents
