Table of Contents
Advertisement
2. Configuring the System Using the Admin UI
Note
If Write Protection is enabled, you will not be able to upload a new image file.
6.
Enable Write Protection Mode to prevent Windows corruption if necessary:
a.
Click Enable.
b.
Click Yes in the
The system reboots.
Note
When Write Protection is enabled, all configuration changes and new logs are kept in a
cache. They are automatically saved and moved to the hard drive at 2:00AM, or upon
restarting the VidyoRoom system. Therefore, if your VidyoRoom system loses power before
2:00AM, all changes and logs that have not been saved will be lost. For more information
about restarting the VidyoRoom system, see
Additionally, when Write Protection is enabled, the log files are named as follows:
VidyoRoom.0 – VidyoRoom.9. When the log file size reaches 250 MB or upon restarting the
VidyoRoom system, a new log file is created.
7.
Upload a new Installer file if necessary:
a.
Click the blue triangle next to the words
b.
Click Choose File and choose the Installer file that you want to upload.
c.
Click Upload Installer.
8.
Upload a new Certificate file if necessary:
a.
Click the blue triangle next to the words
b.
Click Browse to browse to the Certificate file that you want to upload.
c.
Click Upload Certificate.
Uploading UI Backgrounds
UI
The
tab enables you to upload backgrounds for the
can then choose the image they want from among the uploaded images to set as their
background image.
The maximum resolution for an uploaded image is 3840 x 2160, and the size must be less than 10
MB.
Reboot Required
pop-up that displays.
55
Shutting
Down.
Upload Installer
.
Upload Certificate
if necessary.
Home
screen and
Settings
screen. Users
Advertisement
Table of Contents
