Obtaining Log Files; Setting The System Time - Vidyo vidyoroom Administrator's Manual

2. Configuring the System Using the Admin UI
13. Click Apply.
At this point, you may want to make a call to see if you like the display layout that you just
set up. If you do not like it, you can make changes on the
make another call. Continue making changes and checking them in a call until the layout is
the way you like it.
14. Click Lock EDIDs.
Vidyo highly recommends that you click this button after configuring your display layout—
especially when using 4K monitors. Not doing so may cause issues such as the displays
not getting detected when they come back from sleep mode, the display order changing,
etc.
If you need to unplug a display from the VidyoRoom or VidyoPanorama setup, Vidyo
recommends following these steps:
a. Click Unlock EDIDs.
b. Add, remove, or change the order of the displays.
c. Reboot.
d. Configure the displays with the desired settings.
e. Click Lock EDIDs.

Obtaining Log Files

Logs
The tab enables you to set the system time, set the reboots to take place on a recurring
schedule, and obtain log files for the VidyoRoom or VidyoPanorama 600.

Setting the System Time

To set the system time:
Logs
1. Click the
2. Click the blue triangle next to the word
tab.
Display Layout
Time
to view the time settings if needed.
45
tab, and then