Table of Contents
Advertisement
2. Configuring the System Using the Admin UI
Configuring VidyoRoom Pairing (Preview Feature)
Note
The VidyoRoom Pairing feature is a new feature that is being introduced in phases. The first
phase, which is part of the version 3.3.11 release, is described in this section.
The VidyoRoom pairing feature enables you to use the cameras from two or more VidyoRoom or
VidyoPanorama 600 systems in your conference. This feature is especially useful in larger
conference rooms where you might want to use more than one camera to capture the active
speaker.
Vidyo recommends this feature only for use at sites that have a device that can balance and route
the transmitted audio (such as a Biamp®).
To configure VidyoRoom Pairing:
Settings
1.
Click the
2.
Click the blue triangle next to the words
settings if needed.
3.
Select the Make this VidyoRoom part of a paired VidyoRooms group checkbox if you want
to pair this VidyoRoom with other VidyoRoom(s).
4.
Enter a name for the group of paired VidyoRooms in the Group Name field.
You must give the same group name to the other paired VidyoRooms in the group. For
example, if you want to pair an HD-230 and a VidyoPanorama 600 that are both located in
tab.
VidyoRoom Pairing
to view the VidyoRoom pairing
30
Advertisement
Table of Contents
