Table of Contents
Advertisement
2. Configuring the System Using the Admin UI
For more information about who to properly configure the values for your Splunk forwarder,
refer to the Splunk documentation at
http://docs.splunk.com/Documentation/Forwarder/6.4.3/Forwarder/Configuretheuniversalfo
rwarder.
5.
Enter the IP address or the hostname of the Splunk server in the Server Address field.
6.
Enter the listening port of the Splunk Server in the Server Port field.
7.
Select the Enable SSL checkbox if you want to encrypt the log data that you are sending to
the server.
8.
Enter the password for the RSA private key contained in the server certificate file in the
Certificate Password field.
9.
Upload a new root Certificate Authority file if necessary:
a.
Click Choose File and choose the .crt file that you want to upload.
b.
Click Upload Root CA.
10.
Upload a new Certificate file if necessary:
a.
Click Choose File and choose the .pem file that you want to upload.
b.
Click Upload Certificate.
11.
Click Save.
Updating the Firmware
Firmware
The
tab enables you to upload a new image file or a new certificate file to the VidyoRoom
or VidyoPanorama 600 local disk. Normally, the client installer is downloaded from the VidyoPortal
to the VidyoRoom or VidyoPanorama 600; however, you can use the
option for uploading the client. This is useful when the VidyoPortal does not have a client installer
file available or when the VidyoPortal version does not support uploading the client.
Please do the following prior to uploading an image or client installer file if accessing the Admin UI
via your Internet Explorer browser:
Internet Options > Advanced > Security
1.
Navigate to
2.
Ensure that the Enable SmartScreen Filter and Send Do Not Track requests to sites you
visit in Internet Explorer* checkboxes are selected.
Firmware
.
51
tab as another
Advertisement
Table of Contents
