Table of Contents
Advertisement
2. Configuring the System Using the Admin UI
3.
Enter the system time of the VidyoRoom or VidyoPanorama 600.
4.
Click Set Time.
Note
If the CMOS battery fails, the system date reverts back a few years. When you attempt to
manually change correct the system date via the Admin UI, a the CMOS Battery Warning
notification may appear to remind you to check if your the CMOS battery needs to be
replaced.
Configuring the Reboot Maintenance Schedule
Maintenance
This
section enables you to schedule your reboots on a monthly or weekly basis or
by the number of days since the last reboot.
To configure the reboot maintenance schedule:
Logs
1.
Click the
2.
Click the blue triangle next to the words
needed.
3.
Select the Enable Reset Maintenance checkbox to set a recurring reboot schedule:
a.
Select the Monthly radio button and select a number to set your system to reboot after
that number of months have elapsed.
b.
Select Weekly radio button and select a day to set your system to reboot on that day
each week.
c.
Select the Days since last system reboot radio button and select a number to set your
system to reboot after that number of days have elapsed.
tab.
Maintenance
to view the maintenance settings if
46
Advertisement
Table of Contents
