Using The Web Configuration; Configuring The Settings - Vidyo VidyoRoom HD-220 User Manual

Rather than configure your VidyoRoom onsite in the conference room in which it resides, you can change
VidyoRoom settings remotely via a web interface.
To access the Web Configuration pages:
1. In an internet browser, enter the IP address of your VidyoRoom followed by: 88 (the port number).
For example:
http://[ipaddress/URL]:88
The VidyoRoom Configuration page login screen will appear.
2. Enter the default log in settings:
 User Id: admin

Password: VidyoRoom (case sensitive)
If you need to change your password later on, you can by selecting the Reset Password tab on the Web
Configuration page. For more information, refer to the "Resetting the Password" section on page 62.

CONFIGURING THE SETTINGS

The Settings tab enables you to configure your VidyoRoom settings. This section includes illustrations of the
HD-220, HD-100, and HD-50 Settings tab. Most of the fields on the tab are the same for each model;
however, any differences are noted within the steps.
To configuring the settings:
1. In the Account section:
a.
In the Portal field, enter the IP address or fully qualified domain name for your VidyoRoom.
b.
In the User Name and Password fields, enter your VidyoRoom user name and password.
8. Using the Web Configuration Pages
54