Performance Monitor - Kubota M5N-091 Operator's Manual

52 OPERATING THE TRACTOR
BPerformance Monitor
C Display change
Use the mode selector switch and "Select" switch to
choose one of the items shown in the table below to be
displayed on screen.
C Priority display
1. When the RPM dual memory setting is "ON", the
engine rpm A/B is displayed on the screen.
When selecting any other information such as "Hour
meter" or "PM buildup", the item will displayed for
approx. 5 second before resuming the engine rpm A/B
display.
2. Turn "OFF" the RPM dual memory setting to display
any other information continuously.
(See "RPM Dual Memory Setting" in "ELECTRONIC
ENGINE CONTROL"
TRACTOR" section.)
C List of types of information displayed on the performance monitor
Selected
screen Display
(mode)
1/4
2/4
3/4
4/4
A Hold down the mode selector switch for 2 seconds or longer to reset the "Trip meter", "Average fuel consumption" and
"Total fuel consumption" displays to [0.0]
in "OPERATING THE
A The hour meter indicates in 6 digits the hours the
Elapsed time
(Hour meter)
A The total operating hours, counted from the
Trip meter
Instantaneous A The "Instantaneous fuel consumption" is measured
fuel
consumption
A The "Average fuel consumption" is measured per
Average fuel
consumption
A Displays the total fuel consumption measured from
Total fuel
consumption
A Displays the PM buildup inside the DPF muffler.
PM buildup
A Regeneration is needed when the 100% level has
(percentage)
PM buildup
A The more the bar is extended to the right, the more
(graph)
A Engine RPM dual memory A rpm is displayed.
Memory A rpm
Memory B rpm A Engine RPM dual memory B rpm is displayed.

(1) Performance monitor

(2) Mode selector switch
(3) Select switch
Remarks
tractor has been used; the last digit indicates 1/10 of
an hour.
previous resetting, is displayed.
per hour.
hour from the previous resetting.
the previous resetting.
been reached.
PM builds up.
Reference
page
---
---
---
---
---
---
53
53