Checking Wheel Bolt Torque; Checking Tie-Rod Dust Cover; Every 100 Hours; Lubricating Grease Fittings - Kubota M5N-091 Operator's Manual

102 PERIODIC SERVICE
BChecking Wheel Bolt Torque
To avoid personal injury or death:
A Never operate tractor with a loose rim, wheel,
or axle.
A Any time bolts and nuts are loosened, retighten
to specified torque.
A Check all bolts and nuts frequently and keep
them tight.
Check wheel bolts and nuts regularly especially when
new. If they are loose, tighten them.
(1) Wheel bolts
(See "WHEEL ADJUSTMENT" in "TIRES, WHEELS AND
BALLAST" section.)
BChecking Tie-rod Dust Cover
1. Check to see that dust covers are not damaged.
2. If dust covers are damaged, consult local KUBOTA
Dealer for this service.
(1) Dust cover
A If dust covers are cracked, water and dust invade into
tie-rod and it will be early wear.

EVERY 100 HOURS

BLubricating Grease Fittings
Apply a small amount of multipurpose grease to the
following points every 100 hours:
If you operated the machine in extremely wet and muddy
conditions, lubricate grease fittings more often.
(1) Grease fitting (Front axle support)
(1) Grease fitting (Front axle support)
(1) Grease fitting (Front axle gear case support) [RH, LH]