Kubota M5N-091 Operator's Manual page 52

28 OPERATING THE ENGINE
2. Make sure the fuel shutoff-valve is in
the "OPEN" position.
(1) Fuel shutoff-valve
3. Place the shift levers in "NEUTRAL"
position.
(1) Hydraulic-shuttle shift lever
(2) Main gear shift lever
(A) "CLOSE"
(B) "OPEN"
(F) "FORWARD"
(N) "NEUTRAL POSITION"
(R) "REVERSE"
4. Place the PTO clutch control switch in
"OFF" position and hydraulic control
levers in "LOWEST" position.
(1) PTO clutch control switch
(2) Position control lever
(3) Draft control lever
5. Set the throttle lever at the minimum
speed position.
(1) Hand throttle lever
(2) Foot throttle
"ON" "OFF"
(A) "DOWN"
"INCREASE"
"DECREASE"