Travel Speed Limiter - Kubota M5N-091 Operator's Manual

40 OPERATING THE TRACTOR
7. Selecting the Travel Speed.
(1) Shuttle shift lever
(2) Main gear shift lever
(3) Range gear shift lever
(4) Clutch off switch [Dual speed model]
(5) Dual speed shift switch [Dual speed model]
By combination of using the main gear shift lever, dual
speed shift switch, range gear shift lever and shuttle shift
lever, forward speeds and reverse speeds shown in the
table below are obtained.
Without
Standard model
creep
(F12 / R12)
With
creep
Without
Dual speed model
creep
(F24 / R24)
With
creep
(F) "FORWARD"
(N) "NEUTRAL POSITION"
(R) "REVERSE"
12 forward speeds
12 reverse speeds
18 forward speeds
18 reverse speeds
24 forward speeds
24 reverse speeds
36 forward speeds
36 reverse speeds
"LOW"
"HIGH"
"CREEP" (if equipped)
BTravel Speed Limiter
The highest travel speed is reachable when the engine
rpm is at around the middle level with the maximum travel
speed range. This provides for a fuel-efficient run while
traveling along roads, pulling a trailer, etc. Step on the foot
throttle, and the engine rpm rises proportionally and the
travel speed goes up accordingly. But the engine speed is
limited to 2080 rpm or so, and it does not increase even if
the foot throttle is increased.
When the main gear shift lever is set to the H-6 position,
the Rev-Limiter indicator illuminates.