Rear Wheels - Kubota M5N-091 Operator's Manual

BRear Wheels
Rear tread width can be adjusted as shown with the
standard equipped tires.
To change the tread width
1. Remove the wheel rim and / or disk mounting bolts.
2. Change the position of the rim and / or disk (right and
left) to the desired position, and tighten the bolts.
A Always attach wheels as shown in the drawing.
A If not attached as illustrated, transmission parts may
be damaged.
A When re-fitting or adjusting a wheel, tighten the bolts
to the following torques then recheck after driving the
tractor 200m (200 yards) and 10 times of shuttle
movement by 5 m (5 yards), and thereafter according
to service interval. (See "MAINTENANCE" section.)
970 mm
12.4-24
(38.2 in.)
380/85R24 ---
380/85R24
---
Cast
480/65R24 ---
1055 mm
320/85R20
(41.5 in.)
1025 mm 1205 mm
(40.4 in.) (47.4 in.)
1115 mm 1110 mm
(43.9 in.) (43.7 in.)
1160 mm 1085 mm
(45.7 in.) (42.7 in.)
1155 mm 1090 mm
(45.5 in.) (42.9 in.)
1160 mm 1270 mm
(45.7 in.) (50.0 in.)
TIRES, WHEELS AND BALLAST
(1)
Steel disk
260 to 304 244
(26.5 to 31.0) (24.9)
[191.8 to 224.2] [180]
1255 mm 1330 mm
(49.4 in.) (52.3 in.)
1350 mm 1240 mm
(53.1 in.) (48.8 in.)
1375 mm 1160 mm
(54.1 in.) (45.7 in.)
1370 mm 1165 mm
(53.9 in.) (45.9 in.)
75
N-m (kgf-m) [ft-lbs]
(2)
Cast iron disk
260 to 304
(26.5 to 31.0)
[191.8 to 224.2]
1385 mm
(54.5 in.)
---
---
---