Performance Monitor - Kubota M6S-111 Operator's Manual

OPERATING THE TRACTOR

2. Performance monitor

Display change
Use the mode selector switch and select switch to
choose one of the items shown in the following table to
be displayed on screen.
Priority display
1. When the RPM dual memory setting is "ON", the
engine rpm A or B is displayed on the screen.
When selecting any other information such as
"Hour meter" or "PM buildup", the item will
displayed for approximately 5 seconds before
resuming the engine rpm A or B display.
2. Turn "OFF" the RPM dual memory setting to display
any other information continuously.
(See RPM dual memory setting on page 93.)
List of types of information displayed on the performance monitor
Selected
screen Display
(mode)
1/4
2/4
3/4
4/4
NOTE :
• Hold down the mode selector switch for 2 seconds or longer to reset the "Trip meter", "Average fuel
consumption" and "Total fuel consumption" displays to
92
•
Elapsed time (hour meter)
•
Trip meter
Instantaneous fuel con- •
sumption
•
Average fuel consumption
•
Total fuel consumption
PM buildup (percentage) •
•
PM buildup (graph)
•
Memory A rpm •
Memory B rpm •
(1) Performance monitor
(2) Mode selector switch
(3) Select switch
Remarks
The hour meter indicates in 6 digits the hours the tractor
has been used; the last digit indicates 1/10 of an hour.
The total operating hours, counted from the previous re-
setting, is displayed.
The "Instantaneous fuel consumption" is measured per
hour.
The "Average fuel consumption" is measured per hour
from the previous resetting.
The total fuel consumption, measured from the previous
resetting, is displayed.
The PM buildup inside the DPF muffler is displayed.
Regeneration is needed when the 100% level has been
reached.
The more the bar is extended to the right, the more PM
has built up.
Engine RPM dual memory A rpm is displayed.
Engine RPM dual memory B rpm is displayed.
.
"0.0"
LCD MONITOR
Reference
page
---
---
---
---
---
---
93
93
M6S-111,M6L-111,M6H-101