2. According to the following table, enter the tire
circumference value.
(1) Press the mode selector switch to select a digit.
(2) To put the number forward, press the "Select"
switch. (The numeral changes from 0 to 9 at each
push of the switch.)
Tire circumference table (reference)
Rear tire size
12.4-24 R1
380/85 R24
18.4-16.1 R1
320/85 R20
480/65 R24
3. Press the mode selector switch.
4. To complete the setting, select "Set" with the "Select"
switch.
The various setting mode screen appears again.
Entry (in.)
Entry (cm)
136
345
146
371
133
338
123
312
148
376
OPERATING THE TRACTOR
C Setting the unit
1. Press the mode selector switch to choose "Unit
setting". Then press the "Select" switch, and the unit
setting screen appears.
(1) Unit setting
(1) Unit setting screen
2. Press the "Select" switch and select "Inch" or "cm".
3. Press the mode selector switch.
4. To complete the setting, select "Set" with the "Select"
switch.
The various setting mode screen appears again.
C Setting the PTO speed display
The PTO rpm is set automatically and dose not require
adjusting.
51