Installing The Implement Control Box; Electrical Outlet - Kubota M5N-091 Operator's Manual

INSTALLING THE IMPLEMENT CONTROL
BOX
1. Make an opening in each of the corner plugs.
Introduce the implement control cable and hydraulic
hose through these openings into the CAB.
(1) Corner plug
A Before removing the corner plug, cut the two spots of
the weather strip above the corner plug with a knife.
A Do not remove the weather strip of the corner plug to
prevent rainwater intrusion into the CAB.
(1) Corner plug
(2) Weather strip (rubber)
(3) Knife

ELECTRICAL OUTLET

BElectrical Outlet
(1) Accessory electrical outlet (15A)
(1) Accessory electrical outlet
(A) Terminal: Through the ACC position of the key switch (5 A)
(B) Terminal: Through the battery direct (30A)
(C) Terminal: Ground
CAB OPERATION 87