Table of Contents
Advertisement
SERVICE EVERY 50 HOURS
2. Set the parking brake and stop the engine.
3. Shift the range-gear-shift-lever to the neutral [N]
position.
4. Check whether the speed-control-pedal is in the
neutral position.
5. Shift the PTO-clutch-lever to the off
Test of switches for the operator's seat and the
speed control pedal
1. Start the engine.
2. Depress the speed-control-pedal.
3. Stand up.
Do not get off the machine.
4. Make sure that the engine shuts off after
approximately 1 second.
5. If the engine does not stop, consult your local
KUBOTA Dealer.
Test of switches for the operator's seat and the PTO
clutch lever
1. Start the engine.
2. Engage the PTO-clutch-lever.
3. Stand up.
Do not get off the machine.
4. Make sure that the engine shuts off after
approximately 1 second.
5. If the engine does not stop, consult your local
KUBOTA Dealer.
(1) Range gear shift lever (Hi-
Lo)
4. Checking the wheel bolt torque
WARNING
To avoid serious injury or death:
• Never operate the tractor with a loose rim,
wheel, or axle.
• Any time bolts are loosened, retighten to the
specified torque.
• Check all bolts frequently and keep them tight.
1. Check the wheel bolts regularly especially when
new.
2. If they are loose, tighten them as follows.
BX1880, BX2380, BX2680
position.
(2) PTO clutch lever
(3) Speed control pedal
Front
Rear
(1) Front wheel bolt
(2) Rear wheel bolt
Front wheel bolt
Tightening
torque
Rear wheel bolt
PERIODIC SERVICE
149 N⋅m to 179 N⋅m
(15.2 kgf⋅m to 18.3 kgf⋅m)
[110 lbf⋅ft to 132 lbf⋅ft]
109 N⋅m to 130 N⋅m
(11.1 kgf⋅m to 13.3 kgf⋅m)
[80 lbf⋅ft to 96 lbf⋅ft]
83
Advertisement
Table of Contents
