Checking Wheel Bolt Torque - Kubota STW34 Operator's Manual

5. The engine must shut off after approximately 1
second.
6. If it does not stop, consult your local KUBOTA Dealer
for this service.
C Test: Switch for the parking brake lever.
1. Sit on the operator's seat.
2. Start the engine.
3. Engage the rear PTO gear shift lever, and disengage
the mid-PTO gear shift lever.
4. Release the parking brake.
5. Stand up. (Do not get off the machine.)
6. The engine must shut off after approximately 1
second.
7. If it does not stop, consult your local KUBOTA Dealer
for this service.
(1) Speed control pedal
(2) Clutch pedal
(3) PTO clutch control switch
(4) Rear PTO gear shift lever
(1) Parking brake lever
(2) Mid-PTO gear shift lever
BChecking Wheel Bolt Torque
To avoid personal injury or death:
A Never operate tractor with a loose rim, wheel,
or axle.
A Any time bolts and nuts are loosened, retighten
to specified torque.
A Check all bolts and nuts frequently and keep
them tight.
Check wheel bolts and nuts regularly especially when
new. If they are loose, tighten them as follows.
(1) 85 N-m (9 kgf-m)
(2) 215 N-m (22 kgf-m)
PERIODIC SERVICE 73