Table of Contents
Advertisement
Chapter 2 Preparations
1.6
Removing Top Cover
Remove Top Cover when installing or removing the optional component or change internal cable connection.
1. See steps 1 to 5 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2. Slide Top Cover (front) toward the front of the server while pressing Release Button on the cover.
3. Lift Top Cover (front), and remove it from the server.
4. Loosen Cap Screw of Top Cover (rear), and slide the top cover (rear) toward the rear of the server.
5. Lift Top Cover (rear) and remove it from the server.
48
The screw hole on the place where front and rear top covers overlap each other, is
Tips
not used.
Express5800/R120g-2E User's Guide
1. Installing Internal Optional Devices
Advertisement
Table of Contents
