Table of Contents
Advertisement
Chapter 2 Preparations
Rear panel
Finally, connect the provided
power cord to an outlet. *1
For connecting with UPS,
see the next section.
Display unit *2
Note the following precautions to connect cables.
•
When the device is not Plug and Play device, turn off the server and devices to be connected before
connecting.
•
If connecting any peripheral device and its interface cable made by other companies (a third party), contact
your sales representative to check if they can be used with the server beforehand.
•
Fix the power cord or interface cable with cable ties.
•
Make sure that no pressure is applied on the plug of power cord.
Device with serial interface
M
Management
LAN port
1000BASE-T/
100BASE-TX/
10BASE-T
*1 Connect the power cord to a circuit breaker of up to 15 A.
*2 Either of front or rear port can connect with a display unit.
The serial port cannot be used to connect with leased line.
Tips
Express5800/R120g-2E User's Guide
2. Installation and Connection
Hub, switching hub, etc.
1000BASE-T/
100BASE-TX/
10BASE-T
1
2
Data LAN Ports
USB device
151
Advertisement
Table of Contents
