Optical Disk Drive; Installation - NEC Exress5800 Series User Manual

Chapter 2 Preparations
1.19

Optical Disk Drive

The 16x 2.5-inch Drive Model supports optical disk drive (option).
This section describes the procedure for installing the optional optical disk drive.
1.19.1

Installation

Install an optical disk drive in the following procedure.
1. See steps 1 to 6 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2. Push the lock on optical disk drive to unlatch it,
and pull the tray out.
3. Remove one screw from the tray removed in Step
2, and remove the bracket and dummy cover.
4. Install the optical disk drive to the tray.
Do not install any unsupported optical disk drive.
Important
Note Keep the removed screws and dummy cover for future use.
Express5800/R120g-2E User's Guide
1. Installing Internal Optional Devices
Dummy cover
Bracket
117