NEC Exress5800 Series User Manual page 96

Chapter 2 Preparations
7. Connect the SAS cable and SGPIO cable to the HDD cage and the Expander Card. See the figure
below.
Expander Card
SAS cable
SGPIO cable
8. Install Air Duct, Support Bar, and then install Top Cover.
9. Attach the ID label to the front face of chassis.
96
0 1 2 3 4 5 6 7
Note Keep the removed blank cover for future use.
Express5800/R120g-2E User's Guide
1. Installing Internal Optional Devices
HDD Backplane
RAID Controller
(PORTS_0-3)
RAID Controller
(PORTS_4-7)
Motherboard
(SGPIO)