NEC Exress5800 Series User Manual page 86

Chapter 2 Preparations
4. Insert the backup device into the bracket.
5. Secure the backup device with the four screws that come with the server.
6. Insert the device with bracket into expansion bay.
When the device is completely inserted, it is locked with clicking sound.
86
•
Be sure to use the screws that come with your server.
Important
•
Adjust the mounting position of backup file unit so that their screw holes are
aligned with those on the bracket.
•
If you feel difficult to connect a cable because the depth of backup device is too
long, move the device toward front, then connect the cable.
Note Pay attention not to pinch the cable when inserting the device.
Express5800/R120g-2E User's Guide
1. Installing Internal Optional Devices