Table of Contents
Advertisement
Chapter 2 Preparations
9. Depending on the components to be installed or removed, follow the procedure in order.
See Chapter 2 (1.9 TPM Kit to 1.20 Use of Internal Hard Disk Drives in the RAID System).
10. Mount Air Duct.
See Chapter 2 (1.22 Air Duct)..
11. Mount Support Bar.
See Chapter 2 (1.22 Installing Support Bar).
12. Attach Top Cover.
See Chapter 2 (1.23 Installing Top Cover).
13. Mount the server onto the rack.
See Chapter 2 (2.1.2 (1) Installation).
14. Install hard disk drives.
See Chapter 2 (1.24 2.5-inch Hard Disk Drive or 1.25 3.5-inch Hard Disk Drive).
15. Install power supply units.
See Chapter 2 (1.26 Power Supply Unit).
16. Attach Front Bezel.
See Chapter 2 (1.27 Installing Front Bezel).
This is the end of the installation or removal procedures for internal optional devices.
Continue the setup with reference to Chapter 2 (2.2 Connection).
44
Express5800/R120g-2E User's Guide
1. Installing Internal Optional Devices
Advertisement
Table of Contents
