Table of Contents
Advertisement
Chapter 1 General Description
26x 2.5-inch Drive Model
See 4.1 Front View
(With Front Bezel).
(9)-1
(13)
12x 3.5-inch Drive Model
See 4.1 Front View
(With Front Bezel).
(13)
(9) DISK LED
LEDs for showing the hard disk drive status.
The LED provided for each HDD.
(See page 36)
(10) 2.5-inch / 3.5-inch Hard Disk Drive Bay
Bays for installing HDDs.
(11) USB Connectors (front)
Connectors for connecting USB interface devices.
(12) DUMP Switch (NMI)
A switch for collecting the memory dump.
(13) BMC RESET Switch
A switch for resetting BMC of this server. Use the switch
only when there is a problem with EXPRESSSCOPE
Engine 3 (BMC).
To use this switch, press it at least five seconds.
(14)
(15)
(9)-2
(12)
(10)
(14)
(15)
(9)-1
(9)-2
(12)
(10)
Express5800/R120g-2E User's Guide
(16)
(14) POWER Switch
A switch for turning on/off the server. Press once to turn on
the server. POWER LED lights when it is on. Press it again
to turn off the server. Hold down the switch for four seconds
or more to forcibly turn off the server.
(15) Unit ID (UID) Switch
A switch for turning on/off UID LED.
Pressing the switch once turns on UID LED and pressing
again turns off the LED.
(16) Pull-out Tab
A tab for showing the part number and serial number of the
server.
(17) 2.5-inch Additional HDD Cage Bay
A bay for installing 2.5-inch Additional HDD cage.
4. Names and Functions of Parts
(11)
(17)
(16)
(11)
27
Advertisement
Table of Contents
