Table of Contents
Advertisement
Chapter 2 Preparations
1.17
Additional 2.5-inch HDD Cage (Rear)
The server of 26x 2.5-inch Drive Model and 3.5-inch Drive Model can have additional HDD cage (rear) for
installing additional hard disk drives.
1.17.1
Installation
Follow the steps below to install an additional HDD cage.
1. See steps 1 to 6 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2. For 26x 2.5-inch Drive Model, see the following figure to confirm the switch settings of the Expander
Card. Change the setting if it differs from the setting shown in the following figure.
3. Remove the three screws from 2.5-inch additional HDD cage, and remove the blank cover.
100
Switch setting
O
N
O
N
O
N
Express5800/R120g-2E User's Guide
1. Installing Internal Optional Devices
Device front
Expander Card
Device rear
Advertisement
Table of Contents
