Installing The Server To The Rack Or Removing It From The Rack - NEC Exress5800 Series User Manual

Chapter 2 Preparations
2.1.2

Installing the server to the rack or removing it from the rack

Mount the server to the rack. (This section also describes the removal procedure.)
142
Be sure to observe the following precautions to use the server safety. Failure to
observe the precautions may cause death or serious injury. For details, see
Safety Precautions and Regulatory Notices.
• Do not use any racks out of standards.
• Use only under the specified environment.
Be sure to observe the following precautions to use the server safely. Failure to
observe the precautions may cause burns, injury, and property damage. For
details, see Safety Precautions and Regulatory Notices.
• Do not drop.
• Do not leave the server being pulled out.
• Do not install with the cover removed.
• Do not get your fingers caught.
Important Temperature increases and airflow in the rack
If multiple devices are installed, or if the inside of the rack is not sufficiently
ventilated, the internal temperature rises due to the heat emitted from each
device, which may result in a malfunction. Review airflow in the rack and
room and take sufficient measures so that the internal temperature will not
exceed the operational temperature during operation.
Air enters the server from the front and exits from the rear.
Express5800/R120g-2E User's Guide
2. Installation and Connection
WARNING
CAUTION