Confirming Servers (Uid Switch) - NEC Exress5800 Series User Manual

Chapter 2 Preparations
1. Installing Internal Optional Devices
1.4

Confirming Servers (UID Switch)

Using Unit ID (UID) Switch helps you to identify the target server.
When the server is working, before you turn the server off or disconnect a cable from the server, be sure to
identify the target server by using UID Switch/LED first.
To turn UID LED on, press UID Switch. When it is pressed again, the LED will be off.
<Front View> 16x 2.5-inch Drive Model
UID switch
<Front View> 26x 2.5-inch Drive Model / 3.5-inch Drive Model
UID switch
<Rear View>
UID switch
ID
Express5800/R120g-2E User's Guide
45