2N helios ip force Installation Manual page 90

3.1 Configuration
Use a PC equipped with any web browser to configure
Launch your web browser (Internet Explorer, Firefox, etc.).
Enter the IP address of your intercom (
Log in using the
You have to know the IP address of your device to log in to the integrated web server.
®
By default, 2N Helios IP Force
obtains the IP address automatically if a properly set DHCP server is available in your
LAN. If no such DHCP server is available, you can operate
static IP address mode.
If your device remains inaccessible (you have forgotten the IP address, or the LAN
configuration has changed, for example), change the LAN settings using the buttons
on the device.
IP Address Retrieval
Take the following steps to retrieve the
Connect (or, if connected, disconnect and reconnect)
power supply.
Wait for the second sound signal
Press the first quick dial button 5 times.
®
2N Helios IP Force
If the address is 0.0.0.0, it means that the intercom has not obtained the IP
address from the DHCP server.
2N TELEKOMUNIKACE a.s., www.2n.cz
Admin user name and
is switched into the dynamic IP address mode, i.e. it
2N
will read its IP address.
®
2N Helios IP Force
http://192.168.1.100/
2n password.
2N
®
Helios IP Force IP address:
2N
.
:
, e.g.).
®
Helios IP Force in the
®
Helios IP Force to the
90/110