2N helios ip force Installation Manual page 93

Caution
The 2, 1, 1, 2, 2, 3 sequence must be entered within 30 seconds after the
first sound signal for security reasons. The inter-digit delay may be 2 s at
most .
®
2N Helios IP Force
configured properly.
Mode Switching with 1 or 2-Button Models
®
In case your 2N Helios IP Force
switch the modes using one button only.
®
Connect 2N
it if already connected).
Wait for the first acoustic signal
Press the first quick dial button 15 times.
The acoustic signal
Wait until the device is restarted automatically.
2N TELEKOMUNIKACE a.s., www.2n.cz
gets the IP address upon restart only if the DHCP server is
device is equipped with 1 or 2 buttons, you can
Helios IP Force to the power supply (or, disconnect and reconnect
indicates mode switching.
.
93/110