Additional Modules - 2N helios ip force Installation Manual

Additional Modules

Part No. 9151010
Part No.
Part No. 9151016
2N TELEKOMUNIKACE a.s., www.2n.cz
9151011
Additional switch with normally open/closed
contact and 12 V switched output.
Includes tamper switch.
Enables control of a secondary device, passive
time unlimited switching up to 48 V / 2 A or
active switch 12 V / 700 mA. Also includes
tamper switch to signal opening of the front
panel.
Includes tamper switch.
Internal RFID card reader 125 kHz for
®
installation in 2N Helios IP Force
Allows the use of EM4100, EM4102 and HID
Proximity cards. Another two switches, two
logical inputs and a Wiegand interface are
available. It is compatible with the 2N
IP Force two-button and pictogram models. It
also includes a security switch to signal when
the front panel is opened.
Includes tamper switch.
Internal RFID card reader 13.56 MHz for
®
installation in 2N Helios IP Force
Two switches, two logical inputs and a
Wiegand interface are available. It is
compatible with the 2N
button and pictogram models. It also includes a
security switch to signal when the front panel
is opened.
Allows the use 13.56MHz cards of these
standards (only card serial number is read):
ISO/IEC 14443A Mifare Classic 1k & 4k, DESFire
EV1, Mini, Plus S&X, Ultralight, Ultralight C
ISO/IEC 14443B CEPAS, HID iCLASS
JIS X 6319 Felica
intercoms.
®
Helios
intercoms.
®
Helios IP Force two-
27/110