Choose Ringtone - Cisco TelePresence MX200 G2 Administrator's Manual

Cisco TelePresence MX200 G2 and MX300 G2

Introduction

Choose ringtone

Sign in to the web interface, and navigate to
Personalization.
Change the ringtone
1. Choose a ringtone from the
drop-down list.
2. Click Save to make it the
active ringtone.
Set the ringtone volume
Use the slide bar to adjust the
ringtone volume.
D15332.01 MX200 G2 and MX300 G2 Administrator Guide CE8.0, NOVEMBER 2015.
Configuration Configuration Peripherals
Configuration >
Maintenance
Play back the ringtone
Click the play button ( ► ) to
play back the ringtone.
Use the stop button (  ) to
end the playback.
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
38
Administrator Guide
System settings Appendices
About ringtones
A set of rintones are installed on the
video system. You should use the web
interface to chose a ringtone, and set the
ringtone volume.
You can play back the chosen ringtone
from the web interface. Note that the
ringtone will be played back on the video
system itself, and not on the computer
running the web interface.