Video Input Connector [2; Video Layout Disabledisconnectedlocaloutputs; Video Monitors; Video Output Connector [1] Brightness - Cisco TelePresence MX200 G2 Administrator's Manual

Cisco TelePresence MX200 G2 and MX300 G2

Introduction
Video Input Connector [2..4] RGBQuantizationRange
The devices connected to the video input should follow the rules for RGB video quantization
range defined in CEA-861. Unfortunately some devices do not follow the standard and this
configuration may be used to override the settings to get a perfect image with any source.
Requires user role: ADMIN
Default value: Connector 2: Full Connector 3, 4: Auto
Value space: Auto/Full/Limited
Auto: RGB quantization range is automatically selected based on video format according
to CEA-861-E. CE video formats will use limited quantization range levels. IT video
formats will use full quantization range levels.
Full: Full quantization range. The R, G, B quantization range includes all code values (0 -
255). This is defined in CEA-861-E.
Limited: Limited Quantization Range. R, G, B quantization range that excludes some code
values at the extremes (16 - 235). This is defined in CEA-861-E.
Video Input Connector [1..4] Visibility
Define the visibility of the video input connector in the menus on the user interface.
Note that Connector 1 is the system's integrated camera, which is not available as a
presentation source.
> The default value is Always for Video Input Connector 2 Visibility (the DVI connector).
> The default value is IfSignal for Video Input Connector 3,4 Visibility.
Requires user role: ADMIN
Default value: Connector 1: Never Connector 2: Always Connector 3, 4: IfSignal
Value space: Connector 1: Never Connector 2, 3, 4: Never/Always/IfSignal
Never: When the input source is not expected to be used as a presentation source, set
to Never.
Always: When set to Always, the menu selection for the video input connector will
always be visible on the graphical user interface.
IfSignal: When set to IfSignal, the menu selection for the video input connector will only
be visible when something is connected to the video input.
D15332.01 MX200 G2 and MX300 G2 Administrator Guide CE8.0, NOVEMBER 2015.
Configuration Peripherals Maintenance

Video Layout DisableDisconnectedLocalOutputs

This setting is fixed to On.
Default value: On
Value space: On
On: The built-in layout engine does only set layout on local outputs having a monitor
connected.

Video Monitors

Define the monitor layout mode to reflect the number of different layouts you want in your
room setup. Note that the second monitor can be reserved for presentations.
Requires user role: ADMIN
Default value: Auto
Value space: Auto/DualPresentationOnly
Auto: If a second monitor is connected, the layout is distributed on two monitors.
Otherwise, everything is displayed on the main monitor.
DualPresentationOnly: All participants in the call are shown on the main monitor. If a
presentation is part of the layout, the presentation is shown on the second monitor.

Video Output Connector [1] Brightness

Define the brightness level for the video system's LCD screen. The default value is 50.
Requires user role: USER
Default value: 80
Value space: Integer (0..100)
Range: The value must be between 0 and 100.
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
115
Administrator Guide
System settings System settings Appendices