Cisco TelePresence MX200 G2 Installation Manual
Wheel base all-in-one video conferencing system
Hide thumbs
Also See for TelePresence MX200 G2:
- Administrator's manual (141 pages) ,
- User manual (79 pages) ,
- Installation manual (9 pages)
Advertisement
Quick Links
Installing Cisco TelePresence MX200 G2 - Wheel Base
78-100248-02A0 | JUNE 2016 | © 2016 Cisco Systems, Inc. All rights reserved.
This installation guide covers MX200 G2 with a wheel base.
Dimensions
Height: 1480 mm / 58.3 in.
Width: 995 mm / 39.2 in.
Depth: 715 mm / 28.0 in.
Weight total: 33 kg / 73 lb
Weight monitor: 24 kg / 53 lb
Manpower
Two people working together are required to mount the
monitor to the base module.
Room setup
Explore the Cisco Project Workplace website to
find inspiration and guidelines when preparing your
office or meeting room for video conferencing,
http://www.cisco.com/go/projectworkplace
Documentation
Cisco Spark: Visit the Cisco Spark help site to find
more information about Spark registered room
systems,
http://help.ciscospark.com
Other services: Visit the Cisco web site to find user
guides and compliance and safety information for
the video system,
http://www.cisco.com/go/mx-docs
1
Advertisement
Related Manuals for Cisco TelePresence MX200 G2
Summary of Contents for Cisco TelePresence MX200 G2
- Page 1 Spark registered room systems, http://help.ciscospark.com Other services: Visit the Cisco web site to find user guides and compliance and safety information for the video system, http://www.cisco.com/go/mx-docs 78-100248-02A0 | JUNE 2016 | © 2016 Cisco Systems, Inc. All rights reserved.
- Page 2 Wheel base • Column • Screws for the base Back cover • Screwdriver Touch controller Accessories: • Microphone(s) • Cables • Screws for mounting the monitor • Gloves 78-100248-02A0 | JUNE 2016 | © 2016 Cisco Systems, Inc. All rights reserved.
- Page 3 M5x8 (Allen key, 3 mm) 4 × You may place the column on the empty wheel base box as illustrated. Then it is easier to enter the screws from below. 78-100248-02A0 | JUNE 2016 | © 2016 Cisco Systems, Inc. All rights reserved.
-
Page 4: Mount The Monitor
You need it in step 4. Front The monitor may be tilting slightly forward. If you gently pull it to a vertical position, the screws enter more easily. 78-100248-02A0 | JUNE 2016 | © 2016 Cisco Systems, Inc. All rights reserved. -
Page 5: Connect The Cables
LAN Reset to factory Optional The wall socket outlet must settings Always use the provided be easily accessible after Cisco TelePresence Table installation. Microphone 20 78-100248-02A0 | JUNE 2016 | © 2016 Cisco Systems, Inc. All rights reserved. -
Page 6: Start Up The System
Touch Lead the cables out at the controller to change the camera position. front or back as appropriate. 78-100248-02A0 | JUNE 2016 | © 2016 Cisco Systems, Inc. All rights reserved. - Page 7 Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or back cover when rolling the unit. Also its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to hang the Touch controller on the hook.
Need help?
Do you have a question about the TelePresence MX200 G2 and is the answer not in the manual?
Questions and answers