Use A Custom Wallpaper - Cisco TelePresence MX200 G2 Administrator's Manual

Cisco TelePresence MX200 G2 and MX300 G2

Introduction

Use a custom wallpaper

Sign in to the web interface, and navigate to
Personalization.
Activate or deactivate the
custom wallpaper
If a custom wallpaper is stored on the
video system, it will be shown here.
Click None to deactivate the wallpaper;
click Custom to activate it. The chosen
option is highlighted.
Upload a custom wallpaper
An existing wallpaper will be overwritten.
1. Click Browse... and locate the
custom wallpaper image file.
2. Click Upload to save the file on the
video system.
Supported file formats: BMP, GIF,
JPEG, PNG
Maximum file size: 4 MByte
The custom wallpaper is automatically
activated once uploaded.
D15332.01 MX200 G2 and MX300 G2 Administrator Guide CE8.0, NOVEMBER 2015.
Configuration Configuration Peripherals
Configuration >
Delete the custom wallpaper
Delete fully removes the custom
wallpaper from the video system.
You have to upload it anew if you want
to start using it again.
Maintenance
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
37
Administrator Guide
System settings Appendices
About wallpapers
If you want the company logo or another
custom picture as background on the
main display, you may upload and use a
custom wallpaper.
Only one custom wallpaper can be stored
on the video system at a time; a new
custom wallpaper overwrites an existing
one.
When you use a custom wallpaper, these
items are removed from the main display:
• The clock
• The list of upcoming meetings